1
Copyright © Shanghai Honesty Fine Chemical Co., LTD . 沪ICP备05017229号
Focus on Wechat
Public Number
PRODUCT CENTER
一 产品中心 一
Page view:
Additives For Coating & Ink
peeling force showed an upward trend.
➣Selection of small stickers: WET-750 has a low surface tension, 0.2% of the
addition, static surface tension can reach 22 dynes/cm.
➣The small paste shows that EFS-407 is especially suitable for coating system. It
can first be added to the powder to disperse first, then add the emulsion, which is
beneficial to improve the chemical stability of the emulsion in the powder.
Products Detail
Auxiliaries series | type | Form | Consumption | purpose | Characteristic | ||||
WT% | adhesive | printing ink | Architectural coatings | Textile coatings | Paper coating | ||||
AP-95 | Neutralization aid | Organic amine | 0.1-1% | * | * | * | * | Multifunctional pH Regulator, Low Ammonia Flavor Release | |
ADT 950 | Tackifier | Rosin tackifier | 1-10% | * | * | * | When used in water-borne adhesives, the peeling force can be increased. For example, label glue and other glue that requires high peeling force. | ||
S-703 | Dispersant | Anionic carboxylate | 0.1-5% | * | * | * | * | * | Good dispersion effect, good color development, stable viscosity, low foam |
S-705 | Anionic carboxylate | 0.1-5% | * | * | * | * | * | Good dispersion effect, good color development, stable viscosity, low foam, especially suitable for the dispersion of anatase titanium dioxide | |
L-808 | Wetting agent | Polyether Modified by Organosilicon | 0.1-1% | * | * | * | * | * | Improve excellent wetting ability, especially for hard-to-wet substrates, no APEO |
WET-60 | sulfosuccinate | 0.1-1% | * | * | * | * | |||
WET-85 | sulfosuccinate | 0.1-1% | * | * | * | * | * | ||
WET-750 | polyether | 0.1-1% | * | * | * | * | * | ||
OT-70 | sulfosuccinate | 0.1-1% | * | * | * | * | * | ||
OT-75 | sulfosuccinate | 0.1-1% | * | * | * | * | * | ||
P-100 | Wetting agent | polyether | 0.1-3% | * | * | * | * |
Excellent wettability, giving excellent stability of calcium ions to emulsions. After adding wetting stabilizer to improve chemical stability and bearing capacity of pigments and fillers |
|
TX-405 | polyether | 0.1-3% | * | * | * | * | |||
EFS-373 | Wetting agent | polyether | 0.2-3% | * | * | * | * | * |
The Wetting agent with low foaming property has no APEO and good wettability, giving the emulsion excellent calcium stability After adding wetting stabilizer to improve chemical stability and bearing capacity of pigments and fillers |
EFS-407 | polyether | 0.1-3% | * | * | * | * | * | ||
DF-523 | Defoamer | mineral oil | 0.1-1% | * | * | * | * | Quick defoaming, lasting effect, containing silicone, used in building coatings | |
DF-528 | Defoamer | mineral oil | 0.1-1% | * | * | * | * | * | Fast defoaming, durable, acid and alkali free, silicone free, for building emulsion. |
DF-538 | Defoamer | mineral oil | 0.1-1% | * | * | * | * | * | Quick defoaming, durable performance, acid and alkali resistance, no silicone, used in pressure sensitive adhesives |
DF-568 | Defoamer | mineral oil | 0.1-0.7% | * | * | * | * | * | Rapid defoaming, durable performance, good compatibility, can be used for pressure sensitive adhesives |
DF-588 | Defoamer | mineral oil | 0.1-0.8% | * | * | * | * | * | It is suitable for the coatings, inks and adhesives with the best defoaming effect, long term effect, and emulsion system with various emulsion systems. The broad spectrum Defoamer is used. With excellent film compatibility, it can achieve high transparency, flawless coating. Durable defoaming capacity in compliance with FDA regulations |
DF-589 | Defoamer | 有机硅 | 0.1-0.8% | * | * | * | * | * | Efficient defoaming ability, excellent compatibility, flawless coating. Durable defoaming capacity in compliance with FDA regulations |
FOAM S-300 | Foam stabilizer | Aliphatic alkanolamide | 1-5% | * | * | Foamed emulsion stabilizer, fine foam. | |||
FCS-100 | Fluorocarbon additives | Fluorocarbon | 0.05-1% | * | * | * | * | * | Low surface tension, excellent wettability, at the same time give the paint film anti-fouling, no APEO |
KIL-100 | Fungicide and antifungal agent | Isothiazolinones | 0.1-0.5% | * | * | * | * | * | Isothiazolinones,Broad spectrum sterilization, no formaldehyde, can be used in various emulsion systems. |
KIL-300 | Fungicide and antifungal agent | Isothiazolinones | 0.1-0.5% | * | * | * | * | * | Isothiazolinones,Broad spectrum sterilization, no formaldehyde, can be used in various emulsion systems. |
KIL-BIT20 | Fungicide and antifungal agent | Isothiazolinones | 0.1-0.5% | * | * | * | * | * | Broad-spectrum sterilization, widely used in water-borne resins, coatings, acrylic polymers, leather, ink, water treatment agents |
KIL-P100 | Fungicide and antifungal agent | 2-溴-2-硝基-1,3-丙二醇 | 0.1-0.5% | * | * | * | * | * | Broad-spectrum sterilization for water-borne chemicals, water treatment, etc. |
KIL-BM5 | Fungicide and antifungal agent | Isothiazolinones | 0.1-0.5% | * | * | * | * | * | No VOC, no CMIT, no formaldehyde |
LEV-202 | Leveling agent | Polyurethane type | 0.1-2% | * | * | * | * | * | Non-ionic environmental protection, providing good leveling of coatings |
PMA-38 | Protective adhesive | Sodium polymethacrylate | 0.3-2% | * | * | * | * | * | It plays an effective protective role in the formation and stability of latex particles in polymerization system. It can significantly reduce the amount of condensed slag and improve the mechanical, chemical and cold and hot storage stability of emulsion, without APEO. |
TCK-35 | Acrylic thickener | Acrylic type | 0.1-0.5% | * | * | * | * | * | Environmentally friendly alkaline swelling and thickening agent with flow leveling to meet the requirements of different viscosity and pseudo plasticity of emulsion, without APEO |
TCK-60 | Acrylic thickener | Acrylic type | 0.1-0.5% | * | * | * | * | * | Environmentally friendly alkali swelling and thickening agent to meet the requirements of different viscosity and pseudo plasticity of emulsion, no APEO |
TCK-110 | Polyurethane Thickener | Polyurethane type | 0.1-0.5% | * | * | * | * | * | Neutralization without neutralization, versatility, suitable for emulsion of cationic system, no APEO |
Previous article
Wetting Dispersing & Defoaming
Suggestion For Special Used
Next article