Welcome To Shanghai Honesty Fine Chemical Co.,Ltd !
Products

Contact Us
Address: No.1559, Canggong Road,Shanghai Chemical Park Fengxian District,Shanghai,China 201417
Tel:+086-021-57448531
Fax:+086-021-57448535
Email:sales@onist-chem.com
      onist8923@live.cn
Your present location:Products >> Additives For Coating & Ink
  • 产品名称: Additives For Coating & Ink
  • tip1: 1、The peeling force of ADT-950 will go upward along with the increase of the additive amount.
  • tip2: 2、L-808,WET-750's static surface tensions can get to 22 dynes/cm when the additive amount at 0.2%.
  • tip3: 3、EFS-373,EFS-407 is suitable for coating system, which can improve the chemical stability.
  • tip4: 4、You need to stir well before using it because defoamer will delaminate if stored for a long time.

Additives series Type Component Dosage Application  Characteristics
WT% Adhesive Ink Architectural coatings Textile coating Paper coating
AP-95 Neutralizer Organic amine 0.1-1%   * * * * Multi-functional pH modifier,low odor of ammonia.
ADT-950 Tackifier Rosin tackifier 1-10% * *     * For water-based glue, improve the peeling force, such as the lable adhesive which requires high peeling strength.
S-703 Dispersant Poly carboxylate-anionic 0.1-5% * * * * * Good dispersion and color developing,stable viscosity,low foaming
S-705 Poly carboxylate-anionic 0.1-5% * * * * * Especially suitable for anatase titanium dioxide dispersing. Good dispersion and color developing, stable viscosity, low foaming.
L-808 Wetting agent Silicone modified polyether 0.1-1% * * * * * Enhance excellent wettability,especially for substrate which is difficult to wet. APEO free.
WET-60 Sulfosuccinate 0.1-1% * * * * *
WET-85 Sulfosuccinate 0.1-1% * * * * *
WET-750 Nonionic 0.1-1% * * * * *
OT-70 Sulfosuccinate 0.1-1% * * * * *
OT-75 Sulfosuccinate 0.1-1% * * * * *
P-100 Wetting agent Polyether 0.1-3% * * *   * Good wettability.Endow the emulsifier with good calcium ion stability.
Enhance chemical stability and pigment bearing capacity after adding wetting stabilizer.
TX-405 Polyether 0.1-3% * * *   *
EFS-373 Wetting agent Polyether 0.2-3% * * * * * 1/Wetting agent with low foaming ability.
2/APEO-free,good wettability.Endow the emulsifier with good calcium ion stability.
3/Enhance chemical stability and pigment bearing capacity after adding wetting stabilizer.  
EFS-407  Polyether 0.1-3% * * * * *
DF-523 Defoamer Mineral oil 0.1-1% *   * * * Fast defoaming.Endurable.Contain silicone.Be used in architectural coatings.
DF-528 Defoamer Mineral oil 0.1-1% * * * * * Fast defoaming.Endurable.Resistant to acids, alkali. Free of silicone.Be used in architectural coatings.
DF-538 Defoamer Mineral oil 0.1-1% * * * * * Fast defoaming.Endurable.Resistant to acids, alkali. Free of silicone.Be used in pressure sensitive adhesive .
DF-568 Defoamer Mineral oil 0.1-0.7% * *   * * Fast defoaming.Endurable.Good compatibility.Be used in pressure sensitive adhesive .
DF-588 Defoamer Mineral oil 0.1-0.8% * * * * * 1/It is applicable to the coat or adhesive,which require the optimum defoaming effect,long acting and compatable with emulsion,emulsion for multi-emulsion series,ink and defoamer for adhesive.2/Has excelllent coating compatibility,so it can get high transparency,flawless coating.3/Long-lasting defoamability,accord with FDA regulation.
DF-589 Defoamer Silicone 0.1-0.8% * * * * * High defoamability,excellent compatibility and flawless coating.Long-lasting defoamability,accord with FDA regulation.
FOAM S-300 Foam stabilizer Fatty alkanolamide  1-5% *     *   Foam stabilizer for foaming emulsion,fine foam. 
FCS-100 Additives Fluorocarbon 0.05-1% * * * * * Low surface tension, excellent wetting ability, and endow with paint film antifouling performance. APEO free.
KIL100 Biocide mildewcide Isothiazolone 0.1-0.5% * * * * * Isothiazolone, broad-spectrum sterilization,free of formaldehyde,can be used for a variety of emulsion systems.
KIL300 Biocide mildewcide Isothiazolone 0.1-0.5% * * * * * Isothiazolone, broad-spectrum sterilization,free of formaldehyde,can be used for a variety of emulsion systems.
KIL-BIT20(new) Biocide mildewcide Isothiazolone 0.1-0.5% * * * * * Broad-spectrum sterilization.Be used in water-based resin,paint,acrylic polymer,leather,ink,water-treatment. 
KIL-P100(new) Biocide mildewcide 2-Bromo-2-nitro-1,3
-propanediol
0.1-0.5% * * * * * Broad-spectrum sterilization.Be used in water-based  chemical and water-treatment.
KIL-BM5(new) Biocide mildewcide Isothiazolone 0.1-0.5% * * * * * VOC free, CMIT free, formaldehyde free.
LEV-202 Leveling agent  Polyurethane 0.1-2% * * * * * Non-ionic environmental coating, provide with good leveling property.
PMA-38 Protective colloid Sodium polymethyl acrylic acid 0.3-2% * * * * * 1/Protect of the latex particles formation and stability in polymerization. 2/Significantly reduce the amount of the condensed slag,and improve the mechanical, chemical and thermal storage stability.APEO free.
TCK-35 Acrylic thickener Acrylic type 0.1-0.5% * * * * * Environmenta leveling alkali swelling and thicker.Satisfy emulsion with different viscosities, pseudoplasticity requirements.APEO free.
TCK-60 Acrylic thickener Acrylic type 0.1-0.5% * * * * * Environmenta leveling alkali swelling and thicker.Satisfy emulsion with different viscosities, pseudoplasticity requirements.APEO free.
TCK-110 Polyurethane thickener Polyurethane type 0.1-0.5% * * * * * Environmenta leveling alkali swelling and thicker.Satisfy emulsion with different viscosities, pseudoplasticity requirements.APEO free.

Download attachments :

keyword :